Send in your LS7 Cylinder Heads for the Modern Airflow Dynamics Treatment.
-Upon disassembly your cylinder heads will be thoroughly cleaned and inspected for any deficiencies.
-Superflow flow bench to document before and after porting flow numbers .
-Correct your valve guide clearance by installing new CHE Bronze valve guides that are honed to correct size.
-Custom Multi-Angle Valve Job machined on our Rottler seat and guide machine
- CNC porting with hand blending to include combustion chamber volume(CC) matching
-Stock titanium intake valves will go through a cleaning and inspection procedure. Exhaust valves will be replaced with Ferrea Hollow stem valves weighing only 86 grams
-PCD Milling of the cylinder heads to achieve desired combustion chamber volume while ensuring flatness as well as achieving a proper RA finish on the deck surface for MLS gaskets. If unsure about the chamber CC size give us a call or email.
-Assembly is where we have the final QC checkpoint. Every square inch of the cylinder head is examined in our climate controlled clean assembly room while installing each piece of the valve train with care.
-After assembly is finished we place your cylinder heads in a Air Tight Bag to ensure cleanliness while they are being delivered to your door.